Sensors

Encases the AZ OneBoard development board, while exposing all expansion slots, enabling heat dissipation, and leaving plenty of room for bulky micro USB connectors for power and programming. The push button is accessible as well when using a pointy object to reach it.The attached sensor modules stick out of the case so the case doesn't influence readings.A particular bonus is that this dampens the glow of the pesky TX/RX LEDs that can't be turned off.

Monitors temperature, humidity, pressure, and CO2 levels for optimum fermentation results.

Network-connected washing machines are prone to breaking and hacking. If you don't want your connectivity needs to negatively impact your cloth washing capability, buy a dumb washing machine and add this thing: A magnetic bracket holding an ESPCAM edge AI™ image processing module (formerly known as micro controller with a camera) that reads the remaining time on a display, and processes it with AI™ technology (actually just plain old deterministic OCR), so systems like Home Assistant can make your phone beep when the laundry is done.Updated version.

Rain and storm resistant weather station for outdoor use. Requires 5V micro USB power supply (not included). Measures temperature and humidity using redundant sensors (DHT22 and BME280) as well as air pressure, eCO2,  and volatile organic compounds - all you need for getting a good grasp of weather and air quality.This design uses a Stevenson screen to shield sensors from radiation and rain, while keeping them well ventilated using chimney physics to ensure accurate sensor readings.The enclosure is printed in PETG and was coated with Dichtol to achieve water- and UV resistance.

Samples CO2 in ambient air continuously, and displays readings in a chart on an e-ink screen. Features: 24h+ battery life. Data logging to microSD card. Additional sensors for temperature, humidity, and air pressure. Sets its clock automatically via WiFi on startup.

There is nearly an unlimited number of GoPro accessories available. Some are useful for mounting microphones.Designed for the first generation of Rode Wireless PRO. Might not be compatible with subsequent generations.

This USB-powered temperature probe features a real-time clock and microSD cart reader to log timestamped temperature data that's gathered using a flexible sensor wire that is temperature resistant up to 125°C and covered in food-safe silicone and steel. Temperature readings are very precise with only +/-0,5°C deviation.The probe is perfectly suited for long-term stationary temperature monitoring, e.g. to track working conditions.The software is extensible for potential Home Assistant support.

USB power meter that publishes measurements in Watts to MQTT for home automation integration. Supports Home Assistant out of the box.

The wireless temperature sensor features a range from -55 to +125 C with a precision of 0.1 C, and reports measurements every 5 minutes to Home Assistant. Set it up using ESPHome. The unit is powered by an included rechargeable 18650 battery. Very useful for monitoring temperatures in remote places where no power supply is available.

The wireless temperature sensor features a range from -55 to +125 C with a precision of 0.1 C, and reports measurements every 5 minutes to Home Assistant. Set it up using ESPHome. The unit is powered by an included rechargeable 18650 battery. Very useful for monitoring temperatures in remote places where no power supply is available.

The wireless temperature sensor features a range from -55 to +125 C with a precision of 0.1 C, and reports measurements every 5 minutes to Home Assistant. Set it up using ESPHome. The unit is powered by an included rechargeable 18650 battery. Very useful for monitoring temperatures in remote places where no power supply is available.