Gadgets

Add more ceremony to product launches, server shutdowns, and openings! Nothing makes you feel important like pressing a dangerous-looking, tempting button. Safety switches were added to make accidental discharge unlikely. The first switch tells the box to connect to the server that will actually perform the action. From this point, the connection is monitored and the latency is displayed. The second switch arms the button, and pressing the button executes an arbitrary command on the connected server, while waiting for confirmation that the action happened.

Encases the AZ OneBoard development board, while exposing all expansion slots, enabling heat dissipation, and leaving plenty of room for bulky micro USB connectors for power and programming. The push button is accessible as well when using a pointy object to reach it.The attached sensor modules stick out of the case so the case doesn't influence readings.A particular bonus is that this dampens the glow of the pesky TX/RX LEDs that can't be turned off.

A great reminder of things you want to avoid. This small desktop sign features a four digit counter that can be configured and incremented via Home Assistant. The control software ESPHome makes this an easy add on for existing sensor or actor setups.The incident to avoid can be easily replaced by sliding in a new one on a 15 mm strip of paper.

Convenient kitchen accessory for drying two shakers or drinking bottles at a time, including their lids. Perfect for heavy users of protein powder and couples.For better durability, this is made from PETG, which has stronger layer adhesion and fewer gaps for moisture to seep through.

Monitors temperature, humidity, pressure, and CO2 levels for optimum fermentation results.

This attachment is from material that glows in the dark and replaces the eraser at the back of the pencil. It shows the logo of the "Birnbam Teifin" club for promoting Austrian folklore and Krampus traditions.Not suitable for small children.

These feet fit Jetblack Volt indoor cycling kits and can be used in combination with tennis balls to dampen the noise indoor cycling normally transmits to the floor.This is a remix of an earlier model for the Jetblack Victory, which has differently shaped feet.

The slim variation of IKEA MALM has a top-side compartment that can be folded open with a mirror inside, which is perfect for storing jewelry. There are no separators, so this can quickly turn into a mess.This separates the usable space of this compartment for better organization, with many small compartments for things like rings, ear rings, necklaces, and cuff links, as well as a large compartment for watches.

Perfect accessory for Mahou Shoujo cosplay. The magic wand's payment function is guaranteed to blow bartenders' minds - I tested it. Prepaid NFC credit card not included - required for complete function.

Network-connected washing machines are prone to breaking and hacking. If you don't want your connectivity needs to negatively impact your cloth washing capability, buy a dumb washing machine and add this thing: A magnetic bracket holding an ESPCAM edge AI™ image processing module (formerly known as micro controller with a camera) that reads the remaining time on a display, and processes it with AI™ technology (actually just plain old deterministic OCR), so systems like Home Assistant can make your phone beep when the laundry is done.Updated version.

Mycroft is probably the most powerful open source voice assistant solution out there. This package hosts Mycroft on a Raspberry Pi 4B with a 360 ° directional microphone array and some speakers.

Control unit for your 3D printer, featuring a touch display that can be tilted and turned as needed for easy access. Designed around the Raspberry Pi 4, and intended to be mounted on a printer enclosure. All info for building this yourself is available on Thingiverse.

Rain and storm resistant weather station for outdoor use. Requires 5V micro USB power supply (not included). Measures temperature and humidity using redundant sensors (DHT22 and BME280) as well as air pressure, eCO2,  and volatile organic compounds - all you need for getting a good grasp of weather and air quality.This design uses a Stevenson screen to shield sensors from radiation and rain, while keeping them well ventilated using chimney physics to ensure accurate sensor readings.The enclosure is printed in PETG and was coated with Dichtol to achieve water- and UV resistance.

Samples CO2 in ambient air continuously, and displays readings in a chart on an e-ink screen. Features: 24h+ battery life. Data logging to microSD card. Additional sensors for temperature, humidity, and air pressure. Sets its clock automatically via WiFi on startup.

Hand-cranking coffee can be tiresome, but automatic grinders often depend on wall power, which isn't always available. With this handy adapter, hand-crank coffee grinders by Mokkalov can be turned using a power drill.

Be it for professional business meetings or starting your OnlyFans career, a properly lit video recording setup is a must have to radiate seriousness and/or good looks.This bright RGB ring light uses ESPHome to integrate with Home Assistant. If the computer connected to the webcam runs the Home Assistant app, it's even possible to automatically turn on the ring light whenever the camera turns on.

There is nearly an unlimited number of GoPro accessories available. Some are useful for mounting microphones.Designed for the first generation of Rode Wireless PRO. Might not be compatible with subsequent generations.

Space saving solution for hanging head phones on an IKEA SKÅDIS pin board. The hanger is connected to the board on the back side and sticks out on the right side, so the only space occupied on the board itself is two pin holes.

This USB-powered temperature probe features a real-time clock and microSD cart reader to log timestamped temperature data that's gathered using a flexible sensor wire that is temperature resistant up to 125°C and covered in food-safe silicone and steel. Temperature readings are very precise with only +/-0,5°C deviation.The probe is perfectly suited for long-term stationary temperature monitoring, e.g. to track working conditions.The software is extensible for potential Home Assistant support.

USB power meter that publishes measurements in Watts to MQTT for home automation integration. Supports Home Assistant out of the box.

The wireless temperature sensor features a range from -55 to +125 C with a precision of 0.1 C, and reports measurements every 5 minutes to Home Assistant. Set it up using ESPHome. The unit is powered by an included rechargeable 18650 battery. Very useful for monitoring temperatures in remote places where no power supply is available.

The wireless temperature sensor features a range from -55 to +125 C with a precision of 0.1 C, and reports measurements every 5 minutes to Home Assistant. Set it up using ESPHome. The unit is powered by an included rechargeable 18650 battery. Very useful for monitoring temperatures in remote places where no power supply is available.